Category: Uncategorized

Floppy disks were the most common external storage for many years until USB memories and USB hard drives appeared on the market.

Many people still keep valuable data on floppy disks, however you may not be able to read them if you don’t have a PC with a floppy drive. Also the disks may develop problems and you may not be able to retrieve data from them.

Today our customer needed to transfer data from floppy disks to a CD. We finished the task quickly while keeping all the data safe.

If you need professional support to recover or transfer data from your floppy disks please contact www.loreatec.jp/e

This intel iMac can not boot. A “Kernel Panic” message appears and the computers freezes. We see this problem often on iMacs and other MAC computers. If you are experiencing this boot problem please contact www.loreatec.jp/e for a reasonable priced fast repair.

Note: the screen on the picture is the Diagnostic screen. To access the diagnostic screen you have to press d key while booting your MAC.

This toshiba dynabook AX/940LS had a fan problem and the system temperature was high. A high temperature will make your computer work more slowly and will increase the error rate. It will also shorten the life of the processor and hard drive.

We could disassemble and clean both the fan and heat sink. Now the temperature is back to normal values and the laptop can be safely used.

If you have temperature or fan problems do not hesitate to use our professional PC supprot at www.loreatec.jp/e

The heat sink is an essential part of all computers. Without it the temperature will increase in a few seconds or minutes and the computer will shut down automatically when it detects a high temperature. If the computer does not correctly detect the temperature and it does not shut down it will keep working until the processor melts and becomes unusable.

Our customer had a problem with several computers as the pins that hold the heat sink were broken and the heat sink was not making good contact. We soldered back the pins into the mother board so that the heat sink could be installed properly.

Soldering pins in the mother board is a very delicate process and destroying the mother board is very likely if you don’t know what you are doing. At LoreaTec we have advanced soldering equipment and experience so that we can successfully solder and repair most mother boards and other electronic equipment.

For more information about fixing your heat sink troubles please go to www.loreatec.jp./e

The mother board is the most important part of a PC. All the other devices are connected to it and a mother board problem usually means unexpected shutdowns or being unable to boot the computer.

This time to fix this computer we replaced the motherboard and our customer could continue using the desktop as if nothing had happened, with no data loose or any other problem.

If you think you may have a mother board problem or need professional diagnostic. Please visit www.LoreaTec.jp/e